Cleaners and Sealers
ACC Cleaners provide added support in the everyday needs of working with concrete precast production; whether it’s cleaning tools and forms to cleaning major equipment and concrete itself.
Sealers are an important aspect and necessary support product within the precast concrete industry. ACC has in its lineup a range of utility sealers as well as products to enhance the beauty of the work you create.
Form Seal
ACC Form-Seal is a hard pre-catalyzed polyurethane coating having outstanding abrasion, wear and chemical resistance as well. The film has a high degree of flexibility and works extremely well pre-treating wood and concrete formwork where medium re-use of up to 40 casts are expected. Coverage rates will vary between 150 and 200 sq.ft./ gallon, depending upon the porosity of the substrate to be coated.
Panel Finish
A special cleaner for architectural precast in particular and all concrete in general where general purpose cleaning is necessary and surface etching is of concern. It combines a blend of mild, fumeless acids and inhibitors, which clean and brighten exposed aggregate concrete, in particular without frosting or burning the aggregates as when using muriatic acid or hydrochloric based cleaners.
ACC 031 Lacquer
A proven high performance 27% concentrate coating in a solvent-based formulation. For use in precast concrete formwork applications and for coating plaster castings when removing the blemishes is important to the final finish. It dries in less than 45 minutes and can be coated and lightly sanded as many times as necessary to create a smooth casting surface or a sealed surface for casting removal from the molded model.
Citri-Solv
A remarkable orange-based, high flash point solvent blend that effectively dissolves adhesive residue off of forms as well as removing retarder residue. Citri-Solv has grease cutting solvents and penetrants, as well as anti-deposition agents. It effectively degreases and cleans a variety of surfaces and equipment without etching.
Micro Finish Gel
A new control acid etching gel. The acid is blended in gel form to help control fumes and for adherence to vertical surfaces for more uniform and controlled etching.
Duro Seal A & B
Duro-Seal creates a hard, wear resistant coating to the surface of timber, concrete and plywood formwork. Duro-Seal may be used as a self-leveling extremely high performance coating when applied with a 3/16” notched squeegee.